Laser Cleaning Sunshine Coast
No chemicals. No damage. Just results.
Mobile laser cleaning that lifts rust, soot, oil, paint and coatings off almost any surface — no grit, no chemicals, no damage.
See it lift off. Drag to reveal.
From old to new — Rust, soot, oil, paint — Gone!
Trusted across the Coast.
Marine & Aviation- Aircraft paint stripping
- Corrosion & oxide removal
- Antifoul & hull cleaning
- Bonding / NDT prep
- Composite & alloy cleaning
Industrial & Plant- Rust & scale removal
- Weld seam cleaning
- Plant & machinery degreasing
- Mould removal
- Pre-coat surface prep
- Paint stripping
- Rust removal
- Weld cleaning
- Bare-metal prep
- Chassis & parts cleaning
- Tooling & mould cleaning
- Oxide & scale removal
- Weld prep
- Precision degreasing
- Pre-coat prep
- Soot & smoke removal
- Fire-damage make-good
- Mould remediation
- Graffiti & vandalism
- Documented before/after
- Graffiti removal
- Soot & smoke
- Paint stripping
- Stone & masonry
- Gentle restoration
See it work in real time.
Our technology is revolutionary — the results — incredible.
Cleaner, gentler, and it works on site.
Sandblasting and chemicals throw grit, dust and runoff across a site that's often occupied or only partly affected. Laser doesn't — it's precise, contained and dry — no mess, no fuss.
Low dust, no grit blowout
Particulate is captured at the source, so it suits occupied buildings and areas you don't want to re-contaminate.
No chemicals or runoff
Nothing to mask, store or dispose of as hazardous waste — and nothing soaking into porous masonry, metal or timber.
Protects the surface
The beam removes the contaminant then self-limits at the parent material — no gouging or erosion the way abrasive blasting can.
Documented & job-ready
We work to a Safe Work Method Statement and laser safety plan, with before/after records for your job or report.
Laser VS Blasting & Chemicals.
We'll tell you straight if another method suits your job better — but for most cleaning work, this is why laser wins.
| Criteria | Laser cleaning | Blasting & chemicals |
|---|---|---|
| Dust & containment | Low, captured at source | High — full containment |
| Use on occupied sites | Suited | Rarely viable |
| Chemicals / residue | None | Solvents or media residue |
| Surface protection | Self-limiting | Can erode or gouge |
| Very large rough areas | Slower | Often faster |
Quick answers.
A focused beam vaporises the contaminant — rust, soot, oil, paint or coatings — off the surface, leaving the material underneath untouched. There's no grit, no chemicals and no water involved.
Steel, aluminium, brick, stone, concrete, timber and more — handling everything from rust and soot to oil, grease, paint and antifoul. Send a photo and we'll confirm it suits your job before we quote.
No. The beam is tuned to lift the contaminant and then effectively stops at the clean parent material, so the surface is preserved rather than gouged the way abrasive blasting can be.
No. Laser cleaning is completely dry and chemical-free, so there's no runoff, no solvents and nothing hazardous to mask, store or dispose of.
Yes. It's low-dust with fume captured at the source, which makes it far more compatible with occupied buildings and indoor work than blasting. We work to a documented laser safety plan.
We're mobile across the Sunshine Coast, from Caloundra to Noosa and west to Nambour (we can also service surrounding areas). We also take your movable items in the workshop (and quotes are cheaper). Send a photo and a few details and we'll come back with a clear, no-obligation price — usually within 24 hours.
Send a photo.
Get your quote.
Every job is different, so we ask a few quick questions and let you upload photos — it's the fastest way to an accurate, no-obligation price.
Takes about a minute · No obligation · We respond quickly